| Description:
The new NSK Care3 automatic handpiece cleaning and lubrication system has been developed by NSK to professionally clean and lubricate all handpieces and airmotors each time before autoclaving. Every Care3 automatic cycle cleans and lubricates 1, 2 or 3 high speed and/or low speed handpieces, plus air motors, handpieces are simply attached to any of the three Care3 ports.
At the touch of a button (S-Short: High speed cycle or L-Long: Low speed Cycle) each handpiece is automatically programmed for correct maintenance and lubrication. 40 seconds after the Start button is pressed all handpieces and air motors are correctly cleaned and lubricated, ready for autoclaving.
|
